Operation type -Add or Remove
To add a numeric ACL, specify the ACL name and related value, select the "add" in the
Operation type and then click "Apply".
22.5.5 Configure extended ACL name configuration
Click "ACL name configuration", the configuration sections will then be shown. There are
6 types of extended ACL name configurations:
IP extended ACL name configuration
ICMP extended ACL name configuration
IGMP extended ACL name configuration
TCP extended ACL name configuration
UDP extended ACL name configuration
Other protocols extended ACL name configuration
Click the related the configuration web page, the configuration is the same with it is with
numeric extended ACL. The only difference is the ACL number needs to be changed to
ACL name, and entered into the ACL name rather than number. CLI command: 1.2.2.5.
22.5.6 Firewall configuration
Click "Filter Configuration", and then "Firewall Configuration" to enter the configuration
page. The detailed explanation is as follows:
Packet filtering -"open" to enable or "close" to disable.
Firewall default action -"accept" means to allow the packet to pass through and
"refuse" to deny the packet.
To enable or disable, users need to click "Apply" to confirm the command.
22.5.7 ACL port binding
835