Debug Switchport Arp Count; Debug Switchport Nd Count - Edge-Core ES4624-SFP Manual

no debug switchport mac count
Function：When the number limitation function debug of mac on the port, if the number
of dynamic MAC and the number of MAC on the port is larger than the max number
allowed, users will see debug information." no debug switchport mac count" command is
used to disable the number limitation function debug of mac on the port.
Parameters：None
Command Mode：Admin Mode
Default Settings：None
Usage Guide：Display the debug information of the number of dynamic mac on the port
Examples：
Switch#debug switchport mac count
%Jun 14 16:04:40 2007 Current mac count 21 is more than or equal to the maximum
limit in port Ethernet3/1
!!%Jun 14 16:04:40 2007 Mac learning will be stopped and some mac will be delete !!

24.3.12 debug switchport arp count

Command：debug switchport arp count
no debug switchport arp count
Function：When the number limitation function debug of arp on the port, if the number of
dynamic arp and the number of arp on the port is larger than the max number allowed,
users will see debug information." no debug switchport arp count" command is used to
disable the number limitation function debug of arp on the port.
Parameters：None
Command Mode：Admin Mode
Default Settings：None
Usage Guide：Display the debug information of the number of dynamic arp on the port
Examples：
Switch#debug switchport arp count
%Jun 14 16:04:40 2007 Current arp count 21 is more than or equal to the maximum limit
in port Ethernet3/1
!!%Jun 14 16:04:40 2007 Arp learning will be stopped and some mac will be delete !!

24.3.13 debug switchport nd count

Command：debug switchport nd count
no debug switchport nd count
Function：When the number limitation function debug of nd on the port, if the number of
892