Virtual-Ip - Edge-Core ES4624-SFP Manual

Interface is Vlan2
Priority is 100
Advertisement interval is 1 sec
Preempt mode is TRUE
VrId <10>
State is Initialize
Virtual IP is 10.1.10.1 (IP owner)
Interface is Vlan1
Configured priority is 255, Current priority is 255
Advertisement interval is 1 sec
Preempt mode is TRUE
Circuit failover interface Vlan1, Priority Delta 10, Status UP
Displayed information
State
Virtual IP
Interface
Priority
Advertisement interval
Preempt
Circuit failover interface

25.3.11 virtual-ip

Commands: virtual-ip <A.B.C.D>
no virtual-ip
Function: Configures the VRRP dummy IP address
Parameters: <A.B.C.D> is the IP address in decimal format.
Default: Not configured by default.
Command mode: VRRP protocol configuration mode
Usage Guide: This command adds a dummy IP address to an existing Standby cluster.
The "no virtual-ip" command removes the dummy IP address from the specified Standby
cluster. Each Standby cluster can have only one dummy IP.
Example: Setting the backup dummy IP address to 10.1.1.1.
Switch(Config-Router-Vrrp)# virtual-ip 10.1.1.1
Explanation
Status
Dummy IP address
Interface Name
Priority
Timer interval
Preemptive mode
Interface Monitor information
904