under
Global
Mode.
1.2.2.8 ACL Mode
ACL type
Entry
Type
Standard
IP
ACL Mode
access-list ip
command
under
Mode.
Type
Extended IP
ACL Mode
access-list ip
command
under
Mode.
1.2.3 Configuration Syntax
ES4624-SFP/ES4626-SFP Switch provides various configuration commands.
Although all the commands are different, they all abide by the syntax for
ES4624-SFP/ES4626-SFP Switch configuration commands. The general commands
format of ES4624-SFP/ES4626-SFP Switch is shown below:
cmdtxt <variable> { enum1 | ... | enumN } [option]
Conventions: cmdtxt in bold font indicates a command keyword; <variable> indicates a
variable parameter; {enum1 | ... | enumN } indicates a mandatory parameter that should
be selected from the parameter set enum1~enumN; and the square bracket ([ ]) in
[option] indicate an optional parameter. There may be combinations of "< >", "{ }" and
"[ ]" in the command line, such as [<variable>],{enum1 <variable>| enum2}, [option1
[option2]], etc.
Here are examples for some actual configuration commands:
show calendar, no parameters required. This is a command with only a keyword
and no parameter, just type in the command to run.
Prompt
Switch(Config-Std-Nacl-
a)#
Global
Switch(Config-Ext-Nacl-
b)#
Global
32
parameters.
return
Global
Mode.
Operates
Exit
Configure
Use the "exit"
parameters
command to
for
return
Standard
Global Mode.
IP
ACL
Mode
Configure
Use the "exit"
parameters
command to
for
return
Extended
Global Mode.
IP
ACL
Mode
to
to
to