Web Management; Main Page; Module Front Panel - Edge-Core ES4624-SFP Manual

ES4624-SFP/ES4626-SFP switch shell support fuzzy match in searching command
and keyword. Shell will recognize commands or keywords correctly if the entered string
causes no conflict.
For example:
1) For command "show interfaces status ethernet 1/1", typing "sh in status e 1/1" will
work
2) However, for command "show running-config", the system will report a "> Ambiguous
command!" error if only "show r" is entered, as Shell is unable to tell whether it is
"show run" or "show running-config". Therefore, Shell will only recognize the
command if "sh ru" is entered.

1.3 Web Management

1.3.1 Main Page

ES4624-SFP/ES4626-SFP switch routing switch provides HTTP web management
function and users can configure and monitor the status of the switch through the web
interface.
To manage the switch through web browser use the following steps:
Configure valid IP address, mask and confirm gateway for the switch.
1) Configure web user management and its password
2) Connect to the switch using the web browser. Enter the username and password to
proceed to web management.

1.3.2 Module Front Panel

When entering username, password and passing authentication, you will see the
following web management main page. On the left of the management page is the main
management menu and on the right of the page system information and command
parameter are displayed. Click the main menu link to browse other management links
and to display configuration and statistic information.
35