Web Management; Dhcp Server Configuration - Edge-Core ES4624-SFP Manual

Message Received
BOOTREQUEST
DHCPDISCOVER
DHCPREQUEST
DHCPDECLINE
DHCPRELEASE
DHCPINFORM
Message Send
BOOTREPLY
DHCPOFFER
DHCPACK
DHCPNAK
DHCPRELAY
DHCPFORWARD

11.6 Web Management

Click DHCP configuration. Users can configure DHCP on the switch.

11.6.1 DHCP server configuration

Click DHCP configuration, DHCP server configuration, The DHCP server
configuration page is shown.
11.6.1.1 Enable DHCP
Click DHCP configuration, DHCP server configuration, Enable DHCP. Users can
enable or disable DHCP server, and configure logging server:
DHCP server status -Enable or disable DHCP server.
port to 45, and then click Apply. The configuration is applied on the switch.
11.6.1.2 Address pool configuration
Click DHCP configuration, DHCP server configuration, Address pool configuration.
Users can configure DHCP address pool:
DHCP pool name (1-32 character) - Configure DHCP pool name.
Address range for allocating, set IP address to 10.1.128.0; set Network mask to
Statistics for DHCP packets received
Total packets received
Number of DHCPDISCOVER packets
Number of DHCPREQUEST packets
Number of DHCPDECLINE packets
Number of DHCPRELEASE packets
Number of DHCPINFORM packets
Statistics for DHCP packets sent
Total packets sent
Number of DHCPOFFER packets
Number of DHCPACK packets
Number of DHCPNAK packets
Number of DHCPRELAY packets
Number of DHCPFORWARD packets
349
0.0.1; set Logging server
; for