Edge-Core ES4624-SFP Manual page 667

Usage Guide: Display the PIM buffered nexthop router information.
Example:
Switch(config)#show ip pim nexthop
Flags: N = New, R = RP, S = Source, U = Unreachable
Destination Type
Refcnt Num
192.168.1.1 N... 1
192.168.1.9 ..S. 1
Displayed Information
Destination
Type
Nexthop Num
Nexthop Addr
Nexthop Ifindex
Nexthop Name
Metric
Pref
Refcnt
20.2.5.1.6 show ip pim mroute dense-mode
Command: show ip pim mroute dense-mode [group <A.B.C.D>] [source <A.B.C.D>]
Function: Display PIM-DM message forwarding items.
Parameter:group <A.B.C.D>: displays forwarding items relevant to this multicast
address.
Source <A.B.C.D>: displays forwarding items relevant to this source.
Default: Do not display (Off).
Command Mode: Admin Mode
Usage Guide:The command shows PIM-DM multicast forwarding items, namely
forwarding items of forward multicast packet in system FIB table.
Example: Display all of PIM-DM message forwarding items.
Switch(config)#show ip pim mroute dense-mode
IP Multicast Routing Table
(*,G) Entries: 1
(S,G) Entries: 1
Nexthop Nexthop
Addr Ifindex
0.0.0.0
0.0.0.0
Explanations
Destination of next item
N: created nexthop,RP direction and S
direction are not determined . R: RP
derection S: source direction U: can't reach
Nexthop number
Nexthop address
Nexthop interface index
Nexthop name
Metric Metric to nexthop
Preference Route preference
Reference count
667
Nexthop Nexthop Metric Pref
Name
2006 0
2006 0
0 1
0 1