Removal Of Horizontal Blades / Vertical Blades - Daikin FT24KV2S Service Manual

Si041055

3. Removal of Horizontal Blades / Vertical Blades

Procedure
Step
1. Remove the horizontal
blades.
Open the horizontal
1
blades.
Bend the horizontal
2
blade slightly and
release the center
shaft. (2 locations)
3 Release the left shaft.
Slide the horizontal
4
blade to the left and
release the right shaft.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Horizontal blade
Left shaft
Removal of Horizontal Blades / Vertical Blades
(R6703)
Center shaft
(R2765)
Center shaft
(R12894)
Right shaft
(R2766)
Points
Remove both the horizontal
blades (upper and lower) in
the same way.
Installation procedure
1. Since the key pattern hook is
provided, rotate the blade
and fit it to the right shaft
first.
2. Fit the blade to the center
and left shafts.
7