Table of Contents
Advertisement
Accessible drives and operating panel
Removing/installing the dummy cover
Ê Remove the total of 4 screws from both sides of the peripheral cage.
Ê Remove the dummy cover.
Keep the dummy cover for future use. If the drive is removed and not
!
replaced by a new one, the dummy cover must be reinstalled to
comply with EMC regulations, cooling requirements and fire
protection measures.
Installation of the dummy cover is performed in reverse order.
02
TX600
100
–
–
1
October 2003
Removal/installation routines
U41057-J16-Z146-1-76
Advertisement
Table of Contents
