Features - Fujitsu PRIMERGY TX600 User Manual

Table of Contents

Advertisement

Description

Features

System board D1411
– ServerWorks GC LE chipset
– 4 processor sockets for Gallatin processors with 2.0 GHz and higher, socket
603, with 400MHz front-side bus and quad-pumped data bus
– 512 Kbyte second-level cache, and 1 or 2MB TLC
– 8 slots for main memory. PC2100 modules (registered DDR DIMM memory
modules with 266 MHz and ECC) for 1-16 Gbyte main memory
– 4x 64-bit hot-plug PCI-X slots with 3x 133MHz, 1x100 MHz
– 1x 64-bit PCI-X slot with 100 MHz (prepared for ZCR)
– 1x 64-bit PCI slot with 33 MHz (long design possible)
– SCSI controller AIC7902 Ultra 320 capable, two-channel; board supports
Zero Channel RAID (with Host RAID function)
– Screen controller ATI Rage XL VGA onboard with 230 MHz RAMDAC and
8 Mbyte SDRAM memory
– Ethernet LAN-Controller Broadcom BCM 5704 with 2x 1 Gbit
– Onboard Remote Management controller (RMC) with a own COM and LAN
interface and an optional battery backup unit
– 2 IDE interfaces ATA100 capable, support PIO mode 0-4
– Floppy port (34-pin classical)
– 1 external parallel interface (ECP- and EPP-compatible)
– 2 external serial ports (COM1 and COM2)
– 1 external serial interface for Remote Management
– 3 external and 2 internal USB1.1 ports
– 2 external RJ45 LAN ports
– 1 external RJ45 LAN port for Remote Management
– 2 external PS/2 interfaces for keyboard and mouse
– 1external port for the optional battery backup unit of the RMC
– System monitoring
Hot-plug PCI slots
As well as standard PCI slots, the server also has four hot-plug PCI slots that
allow boards to be installed and removed online, assuming the operating
system supports this functionality.
02
TX600
6
October 2003
General information
U41057-J16-Z146-1-76

Advertisement

Table of Contents
loading

Table of Contents