Installing/removing the rack model
Ê Lower the server onto the extended telescopic rails.
Ê Adjust the server so that the holes of the telescopic rails are in line with those
of the server. When doing this, ensure that the telescope rails are kept in the
locked position.
Ê Secure the telescopic rails to the server on the left and right with the T20
Torx screwdriver (six screws).
The following steps now only require one person.
Ê Press in the safety springs (1) on both telescopic rails.
02
TX600
186
–
–
Removal/installation routines
1
October 2003
U41057-J16-Z146-1-76