Fujitsu PRIMERGY TX600 User Manual page 94

SCSI hard disk subsystem
Ê Set the jumper J1 or J2 (see
jumpers can be accessed from the bottom (see arrow A).
Ê If jumpers were set on the back of the tape drive, remove them (see arrow
B).
Ê Insert the new tape drive into the carrier.
Ê Fix the tape drive to the carrier with the four screws.
To remove the drive, follow the same procedure in reverse order.
02 TX600 94
– –
A
page 02-TX600-58) on the SCA2 adapter. The
October 2003
Removal/installation routines
U41057-J16-Z146-1-76
B