Table of Contents
Advertisement
SCSI hard disk subsystem
1
Ê Remove the knurled screw (1) of the SCSI backplane to be replaced.
Ê Take off the protective grid from the SCSI backplane, holding it at a slight
angle.
Ê Take off the insulating sheet from the SCSI backplane and keep it safe for
future use.
Ê Take off the SCSI backplane.
Installation of the new SCSI backplane is performed in reverse order.
02
TX600
96
–
–
Removal/installation routines
October 2003
U41057-J16-Z146-1-76
Advertisement
Table of Contents
