Initial operation and operating
Hard disk drive indicator
HDD BUSY (green)
–
lit: HDD in active phase
–
not lit: HDD inactive
HDD FAULT (orange)
(only in conjunction with a RAID controller)
–
not lit: No HDD error
–
lit: HDD faulty or rebuild stopped (drive defective/needs replacing, a re-
build process was stopped or the HDD module is not correctly insert-
ed)
–
slow flash: HDD rebuild (the data is restored by the RAID controller
after a change of hard disk drive)
–
fast flash: HDD identify (drive is identified)
–
four fast flashes/pause: HDD predicted fault
–
two fast flashes/pause: HDD hot spare (hot-spare drive active. The
corresponding drive has failed).
02
TX600
34
–
–
HDD BUSY
HDD FAULT
October 2003
Installation and initial operation
U41057-J16-Z146-1-76