Fujitsu PRIMERGY TX600 User Manual page 176

Installing/removing the rack model
Mounting in the DataCenter rack
For mounting the server in the DataCenter rack you will need the following parts
from the rack mounting kit S26361-F2734-L36:
– Support bracket
– Two telescopic rails (assembled)
– Fastener HL
– Two fixing brackets
Ê Attach the supplied fasteners HL to the rear end of the left telescopic rail (1)
with two screws M5x8 (2) and two hexagonal flange nuts M5 (3).
When mounting the left telescopic rail in the DataCenter rack, the supplied
support bracket must first be mounted on the rear left support upright such that
it is level with the lower edge of the server.
Ê See the assembly instructions in the Service Manual for the DataCenter rack
(see "System components" module).
02 TX600 176
– –
Removal/installation routines
2x M5
3
October 2003
HL
1
2
2x M5x8
U41057-J16-Z146-1-76