Fujitsu PRIMERGY TX600 User Manual page 27

Installation and initial operation
Access to the hard disk modules
Ê Unlock the floor-standing model and remove the key.
Ê Slide the cover of the accessible drives up as far as possible using both
thumbs (1). You will feel a certain resistance (the cover clicks into place
again about half a centimeter above the locked position.)
Ê Remove the hard disk cover toward the front (2) and lift it off its anchor.
The reinstalling of the hard disk cover and the locking of the floor-standing
model are performed in reverse order.
U41057-J16-Z146-1-76
Initial operation and operating
1
2
October 2003 02 TX600 27
– –