Fujitsu PRIMERGY TX600 User Manual page 163

Removal/installation routines
Removing feet from the floor-standing model
For this you need a raised support on which the rollers can project over
i
the edge.
Get a second person to help you turn the server on its side, as the server
!
may weigh up to 55 kg.
Ê Lay the server on its left side. Make sure the feet project over the edge.
Ê Unscrew the four screws on each foot.
Ê Remove the rollers.
U41057-J16-Z146-1-76
Changing the housing variant
October 2003 02 TX600 163
– –