Fujitsu PRIMERGY TX600 User Manual page 9

General information
Server management
Server management is implemented using the supplied ServerView software and
PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens
Computers. PDA reports the threat of a system error or overloading early on, so
that preventive measures can be taken.
ServerView allows the management of all PRIMERGY servers in the network via
a central console. The following are some of the key features supported by
ServerView in this context.
– Remote power-on (Wake On LAN)
– Intrusion detection in the floor-standing model
– Temperature monitoring of the CPU and surrounding area
– Monitoring of the utilization of the PCI buses
– Detailed status and error reports for bus systems, processors and main
memory
– Watchdog timer for Automatic Server Reconfiguration and Restart (ASR&R)
if memory modules or processors fail
– Power monitoring
– Early detection of a defective fan
– Watchdog timer for operating system monitoring and application monitoring
with ASR&R
Further information on the ServerView server management is provided in the
associated documentation.
ServerStart
You can configure the PRIMERGY server quickly and purposefully with the
ServerStart software provided. User-guided menus are available for installing the
server operating systems.
Service and support
PRIMERGY servers are service-friendly and modular, thus enabling quick and
simple maintenance.
The handles and locks (touch points) of the different hot-plug/hot-swap compo-
nents are colored green to allow quicker recognition. Also colored green are the
elements of all other components that can be handled without tools.
PRIMERGY diagnostic LEDs arranged on the system board identify the
component (memory module, CPU, VRMs) on the board that is not functioning
correctly.
U41057-J16-Z146-1-76
October 2003
Description
02 TX600 9
– –