Table of Contents
Advertisement
Boards in PCI slots
Removal/installation routines
1
b
a
When no PCI board is inserted in a slot, the slot is occupied by a dummy
module, which is a supporting plate (a) attached to a separating plate (see
figure above with an RX600 server for example).
Ê Take the separating plate by the grooved surface (b), and pull the separating
plate together with the supporting plate out of the PCI slot (1).
02
TX600
132
October 2003
–
–
U41057-J16-Z146-1-76
Advertisement
Table of Contents
