Fujitsu PRIMERGY TX600 User Manual page 32

Initial operation and operating
Message selection
Menu selection
No entries in menu
You can make 16 entries with a maximum of 20 characters each. The first
entry should indicate the server name as used in the network, but this is not
mandatory. As long as no information is entered, the system display shows
the message "please configure system info".
To enter information, use the SPMAN tool, which can be found on the Server-
Start CD under the Tools menu. The system information is retained when the
system is restarted.
The following table shows examples of possible system information mes-
sages that you can enter via the SPMAN tool:
The SPMAN tool can be found in the Tools menu on the ServerStart
i
CD.
02 TX600 32
– –
Button pressed:
Button released:
Up arrow:
Down arrow:
Button pressed:
Button released:
Left arrow:
Right arrow:
October 2003
Installation and initial operation
Message +1
Menu -1
Message -1
Menu name and message number
x of x are displayed.
Message is displayed
Next message
Previous message
Menu name is displayed
Current entry is displayed
Previous message
Next message
Menu name + "No entries
available" is displayed
U41057-J16-Z146-1-76
Menu +1