Configuring Scan Limit Parameters - Huawei IPC6521-Z20-FI 1080P User Manual

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
To modify a tour track, you must stop the tour track.
Step 1 On the Tour Track Parameters page, select the tour track to modify and click Modify.
The Modify the tour track page is displayed.
Step 2 (Optional) Set Track name.
Step 3 (Optional) Modify the tour track information.


Step 4 Click Save.
The tout track is modified.
----End
Deleting a Tour Track
Step 1 On the Tour Track Parameters page, select the tour track to delete and click Delete.
A confirm dialog box is displayed.
Step 2 Click OK.
The tout track is deleted.
----End
Enabling or Disabling a Tour Track
On the Tour Track Parameters page, select a tour track to enable or disable, click
Start/Stop.

5.5.3 Configuring Scan Limit Parameters

This topic describes how to configure the PTZ limits to restrict the camera rotation range.
Step 1 Choose Settings > PTZ Configuration > Scan Limited.
The Scan Limited page is displayed, as shown in
Issue 02 (2013-09-30)
To modify Preset and Dwell duration, click Modify.
To delete a preset, click Delete.
You can enable a tour track at a time. If a tour track has been enabled and you enable another tour track,
the tour track that has been enabled will automatically stop.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Figure 5-29.
74