Configuring Ip Filter Parameters - Huawei IPC6521-Z20-FI 1080P User Manual

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Table 5-20 Parameter description
Parameter
Ways to obtain
IP
IP address
Subnet mask
Gateway IP
address
Preferred DNS
server
Alternate DNS
server
Step 3 Click Save.
----End

5.4.2 Configuring IP Filter Parameters

You can use the IP filter function to prevent IP data packets from certain IP network segment
and ports or using certain transport layer protocols from being sent to the device.
Background


Issue 02 (2013-09-30)
Description
Method for obtaining the IP address.
IP address of an IPC.
Subnet mask of an IPC's network
adapter.
Gateway IP address required for
accessing IPCs across networks.
IP address of the active domain server.
IP address of the standby domain server.
An IP address segment is obtained by performing a logical-AND of the IP Address and
subnet mask.
A maximum of three IP addresses can be filtered.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Settings
[Default value]
Automatic
NOTE
When you choose to obtain the
IP address automatically, the
system automatically
configures the IP address,
subnet mask, gateway IP
address and the DNS.
[Value range]
IP addresses starting with
127 are invalid. You must
enter an IP address starting
with another value that
ranges from 1 to 223.
[Default Value]
192.168.0.120
[Default value]
255.255.255.0
[Default value]
192.168.0.1
[Default value]
0.0.0.0
[Default value]
0.0.0.0
64