Huawei IPC6521-Z20-FI 1080P User Manual page 54

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Figure 5-10 Behavior Analysis Parameters tab page
Table 5-8 Parameter description
Parameter
Behavior type
Recognize mode
Loitering duration
Issue 02 (2013-09-30)
Description
The following are the
behavior analysis types:

Intrusion detection

Loitering detection
 Abandoned object
detection
 Removed object
detection
 Tripwire detection
Object position to be
detected.
For example, you can set
Object identification mode
to Center so that an alarm is
generated when the object
center crosses the tripwire.
Time period in which a
person or an object is
allowed to loiter in a
sensitive area. If a person or
an object loiters in a
sensitive area for a time
period longer than the
specified time period, an
alarm is generated.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Setting
[Default value]
Intrusion detection
[Default value]
Center
[Value range]
An integer ranging from 0 to
30
[Default value]
0
[Unit]
s
NOTE
The parameter is available
only when Behavior type is
set to Loitering detection.
47