IPC1801-Z36&2802-Z18&5802-Z20
User Guide
Parameter
Alarm Input(s)
Alarm Output(s)
Serial Port(s)
Step 3 Click Set.
----End
5.2 Setting Video and Audio Stream Parameters
Procedure
Step 1 Click Stream Configuration.
The Stream Config page is displayed, as shown in Figure 5-2.
Figure 5-2 Stream Config page
Step 2 Set the parameters according to Table 5-2.
Issue 12 (2014-06-12)
Description
If the message "Device Name Updated" is displayed, click OK. The system
automatically saves the settings.
If the message "You do not have Privileges" is displayed, you must apply for the
parameter setting permission from an administrator. For details, see 9.3 Configuring
User Permissions.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Setting
25