Huawei IPC6521-Z20-FI 1080P User Manual page 86

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Step 2 Select the deployment plan to configure.
deployment plan.
Table 5-24 Parameter description
Parameter
Video alarm
deployment
Alarm input 1
deployment
Alarm input 2
deployment
Step 3 Select a value from Incident type.
Step 4 Specify the time segment.
1.
Issue 02 (2013-09-30)
Description
 If you enable this function, an alarm will be
triggered when an incident of the specified
incident type occurs.
 If you disable this function, an alarm will not be
triggered when an incident of the specified
incident type occurs.

If you enable this function, an alarm will be
triggered when an incident of the Alarm input 1
type occurs.
 If you disable this function, an alarm will not be
triggered when an incident of the Alarm input 1
type occurs.
 If you enable this function, an alarm will be
triggered when an incident of the Alarm input 2
type occurs.
 If you disable this function, an alarm will not be
triggered when an incident of the Alarm input 2
type occurs.
Click Add Plan.
The page for adding a plan is displayed, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-24 lists the parameters for configuring a
Figure
5 Device Configuration
How to Set
-
5-34.
79