Configuring Ptz Limit Stops - Huawei IPC6512-Z30 User Manual

IPC6512-Z30&6522-Z30
User Guide
l PTZ OSD: Set the on-screen display duration of the PTZ status.
l Power-off Memory: The dome can resume its previous PTZ status or actions after it restarted
Step 3 Click
----End

7.3 Configuring PTZ Limit Stops

The dome can be programmed to move within the configurable limit stops (left/right, up/down).
Step 1 Enter the Limit Configuration interface: Configuration > Advanced Configuration > PTZ >
Limit.
Issue 02 (2014-12-25)
– Auto Scan Speed: The dome provides 5 scan modes: auto scan, tilt scan, frame scan,
random scan and panorama scan. The scan speed can be set from level 1 to 40.
– Max.Tilt-angle: The dome provides 6 Max.Tilt angle: -5-90, -4-90, -3-90, -2-90, -1-90,
0-90.
Auto Flip: When the Speed dome reverses by 180° on horizontal, it will flip automatically
to keep the tracking continuity on vertical. You can set the auto flip status as ON or OFF.
Zooming Speed: The zoom speed is adjustable from level 1 to 3.
– Zoom Status: Set the OSD duration of zooming status as 2 seconds, 5 seconds, 10 seconds,
Always Close or Always Open.
– PT Status: Set the azimuth angle display duration while panning and tilting as 2 seconds,
5 seconds, 10 seconds, Always Close or Always Open.
– Preset Status: Set the preset name display duration while calling the preset as 2 seconds,
5 seconds, and 10 seconds, Always Close or Always Open.
from a power-off. You can set the time point of which the dome resumes its PTZ status. You
can set it to resume the status of 30 seconds, 60 seconds, 300 seconds or 600 seconds before
power-off.
to save the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 PTZ Configuration
33