Table of Contents
Advertisement
IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
5.4.3 Configuring NTP Parameters
By setting NTP parameters, you can enable devices on the network to be synchronized with
the server.
During the video recording, do not change the system time. If you change the time, the video
file may be damaged.
Procedure
Step 1 Choose Settings > Network Configuration > NTP Parameters.
The page for setting NTP parameters is displayed, as shown in
Figure 5-20 NTP parameters tab page
Step 2 Set parameters according to
Table 5-21 Parameter description
Parameter
Enable
NTP server
Synchronizatio
n interval
Step 3 Click Save.
Issue 02 (2013-09-30)
Table
5-21.
Description
If you select the parameter, time on the
camera is synchronized with that on the
NTP server.
Domain name or IP address of the server
for time synchronization.
Interval for synchronizing devices with
the server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Figure
5-20.
Settings
-
-
[Value range]
An integer ranging from 5 to
1000
[Default value]
60
[Unit]
min
66
Advertisement
Table of Contents
