IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Figure 5-29 Scan limited page
Step 2 Adjust the PTZ camera to the required limit area by using the PTZ control panel, Click Left
limit or Right limit to set the PTZ limits.
----End
5.5.4 Configuring Pattern Scan Parameters
This topic describes how to configure a pattern scan to specify the camera scanning lines.
Step 1 Choose Settings > PTZ Configuration > Pattern Scan.
The Pattern Scan page is displayed, as shown in
Figure 5-30 Pattern scan page
Step 2 Select a line in the Scan lines area.
Step 3 Choose Start recording.
Issue 02 (2013-09-30)
To preview the configured limits, click Preview.
To stop the preview, click Stop.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Figure
5-30.
75