Huawei IPC6521-Z20-FI 1080P User Manual page 72

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Procedure
Step 1 Choose Settings > Network Configuration > IP Filter.
The IP Filter page is displayed, as shown in
Figure 5-18 IP Filter page
Step 2 Click Add.
The Add filter rule page is displayed, as shown in
Figure 5-19 Add filter rule page
Step 3 Set IP addresses, Subnet mask, Port range, and Protocol type.
Step 4 Click OK.
Step 5 Click Save.
Step 6 Select Enable.
----End
Issue 02 (2013-09-30)
 Both the start and end port numbers must be within the range of 0 to 65535, and the start number
must be equal to or less than the end port number.
 If you select All, all port numbers within the range of 0 to 65535 are filtered.
 You can click Modify and modify the filter rule on the Modify filter rule page that is displayed.
 You can click Delete to delete the filter rule.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-18.
Figure 5-19.
5 Device Configuration
65