Configuring The Intrusion Detection Function - Huawei IPC6521-Z20-FI 1080P User Manual

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Step 5 Set Name.
Step 6 Click Save.
The behavior analysis setting are complete.
----End

5.3.3 Configuring the Intrusion Detection Function

The intrusion detection function checks whether an object enters a sensitive area (a key
surveillance area for which behavior analysis rules have been configured). The system
generates an alarm when an object enters a sensitive area.
Prerequisite
Enable the behavior analysis function. For details, see
Switch.
Procedure
Step 1 Log in to the eSpace IP camera (IPC) web page as the system administrator.
Step 2 Choose Settings > Intelligent Analysis > Behavior Analysis Parameters.
The Behavior Analysis Parameters page is displayed.
Step 3 Set Behavior type to Intrusion detection, as shown in
Issue 02 (2013-09-30)

To change the tripwire direction, select the ID of the tripwire to modify, and move the mouse pointer
to the tripwire. When the mouse pointer changes to the
choose a tripwire direction.
 A surveillance area can have a maximum of 10 angles.

A behavior analysis function supports a maximum of four surveillance areas, and all behavior
analysis functions support a maximum of ten surveillance areas.
 A maximum of five tripwires can be specified.
 You can perform operations in one surveillance area at a time.
 Limitation on the behavior analysis objects: A maximum of 30 objects can be analyzed in distant
object mode, and a maximum of 15 objects can be analyzed in close-up object mode.
 Limitation on object size (the resolution of 352 x 288 is used as an example): A minimum size of 10
x 10 is supported. A maximum size of 100 x 100 is supported in distant object mode. A maximum
size of 100 x 200 is supported in close-up object mode. The value indicates the area, not the
limitation on length and height.
After clicking a domain or a link to jump to a required page, you can press Alt+← (left arrow key) to
return to the previous page.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
icon, right-click the tripwire and
5.3.1 Enabling Behavior Analysis
Figure 5-11.
49