Configuring Alarm Deployment Policy Parameters - Huawei IPC6521-Z20-FI 1080P User Manual

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
The page for configuring temperature alarm parameters is displayed, as shown in
Figure 5-32 Temperature alarm tab page
Step 2 Select Enable.
Step 3 Set Alarm Check Interval.
Step 4 Click Save.
----End

5.6.3 Configuring Alarm Deployment Policy Parameters

You can specify a time segment for receiving specified alarms. If a camera is not configured
with any surveillance deployment scheme, no alarm is generated.
Step 1 Choose Settings > Alarm Configuration > Alarm Deployment Policy.
The page for configuring the surveillance deployment Policy is displayed, as shown in
5-33.
Figure 5-33 Alarm deployment plan tab page
Issue 02 (2013-09-30)
Current Temperature indicates the current device temperature. To update the current temperature, click
the Temperature Alarm tab again.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Figure 5-32.
Figure
78