Enabling Motion Detection - Huawei IPC6521-Z20-FI 1080P User Manual

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide

Enabling Motion Detection

To enable motion detection, select Enable.
Adding a Motion Detection Area
Step 1 Click Add. Draw a motion detection are on the live video image.
Step 2 Set parameters according to
Table 5-6 Parameter description
Parameter
Alarm check
interval
Sensitivity
Step 3 Click Save.
The motion detection area is configured.
----End
Deleting a Motion Detection Area
Step 1 Select a motion detection area on the live video image.
The selected area changes from red to white.
Step 2 Click Delete.
Issue 02 (2013-09-30)
 You can draw a motion detection area at a time. To add more motion detection areas, click Add.
 A maximum of eight motion detection areas can be added.
Description
Interval for the system checking for
object motion with the surveillance range
of the camera.
NOTE
If an object keeps moving in the surveillance
range of the camera, an alarm is generated at
each interval.
Sensitivity of motion detection.
To delete all motion detection areas, click Delete all.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-6.
5 Device Configuration
Setting
[Value range]
An integer ranging from 1 to
256
[Default value]
5
[Value range]
An integer ranging from 1 to
5
[Default value]
3
NOTE
A larger value indicates a
higher sensitivity. The highest
sensitivity level is 5. To detect
slight motion, you are advised
to set the sensitivity to a larger
value.
43