Table of Contents
Advertisement
IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
5.3.6 Configuring the Removed Object Detection Function
The removed object detection function checks whether an object is removed from a sensitive
area. The system generates an alarm when an object is removed.
Prerequisite
Enable the behavior analysis function. For details, see
Switch.
Procedure
Step 1 Log in to the eSpace IP camera (IPC) web page as the system administrator.
Step 2 Choose Settings > Intelligent Analysis > Behavior Analysis Parameters.
The Behavior Analysis Parameters page is displayed.
Step 3 Set Behavior type to Removed object detection, as shown in
Figure 5-14 Removed object detection
Step 4 Set Recognize mode and Alarm check interval.
Table 5-15 Parameter description
Parameter
Recognize mode
Issue 02 (2013-09-30)
After clicking a domain or a link to jump to a required page, you can press Alt+← (left arrow key) to
return to the previous page.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5.3.1 Enabling Behavior Analysis
Table 5-15
Description
Part of an object through
which the object is
identified.
The options are as follows:
Center: indicates that an
object is identified via its
5 Device Configuration
Figure
5-14.
describes the two parameters.
Setting
[Default value]
Center
57
Advertisement
Table of Contents
