Configuring Forward Error Correction Parameters; Configuring Intelligent Analysis Parameters; Enabling Behavior Analysis Switch - Huawei IPC6521-Z20-FI 1080P User Manual

IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Step 3 Click Save.
The motion detection area is deleted.
----End

5.2.8 Configuring Forward Error Correction Parameters

If the packet loss or artifact error occurs during video stream transfer, you can set forward
error correction parameters to improve the packet loss tolerance capability and ensure video
quality.
Background
Forward error correction is an error correction mode, which improves data transmission
reliability.
Procedure
Step 1 Choose Settings > Channel Configuration > Forward Error Correction Parameters.
The Forward Error Correction Parameters page is displayed,as shown in
Figure 5-8 Forward Error Correction Parameters page
Step 2 Select Enable.
Step 3 Set Packet loss rate.
Step 4 Click Save.
----End

5.3 Configuring Intelligent Analysis Parameters

5.3.1 Enabling Behavior Analysis Switch

When the behavior analysis switch is enabled, the behavior analysis function can be set.
Issue 02 (2013-09-30)
A larger value of Packet loss rate indicates more occupied bandwidth. You can set this parameter based
on the site requirements.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Device Configuration
Figure 5-8.
44