Table of Contents
Advertisement
IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
Operation
Modifying a preset
Deleting a preset
Setting a park position
5.5.2 Configuring Tour Track Parameters
After specifying a tour track policy for a camera, you can browse videos shot by the camera
as it rotates along the tour track. A maximum of five tour tracks can be added, and a
maximum of 20 presets can be added for each tour track.
Accessing the Page for Configuring Tour Track Parameters
Choose Settings > PTZ Configuration > Tour Track Parameters. The Tour Track
Parameters page is displayed, as shown in
Issue 02 (2013-09-30)
Procedure
determine the preset.
2. Click Add.
3. Select a preset ID and
enter the name of the
new preset.
4. Click Save.
The newly added preset
is displayed in the preset
list.
1. Select the preset to
modify.
2. Click Modify.
3. Change the name of the
preset.
1. Select the preset to
delete.
2. Click Delete.
3. Click OK.
Deleted presets will be
removed from the preset
list.
1. Click Home position.
2. Select Preset name and
set Reset time.
3. Click Save.
To enable a home position,
select Enable home
position.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
to 31 bytes consisting of
Chinese characters, English
letters, digits, and other
characters that are available
on the keyboard.
One Chinese character
equals three bytes in length
and each of other characters
equal one byte in length.
You can only change the
name of the preset.
A preset cannot be deleted
when it is specified as the
home position or added to a
tour track and is enabled.
The current park position is
displayed on the Home
position information page.
Resume time refers to the
duration from the time that
you stop perform operations
on the camera to the time
that the camera switches
back to the home position
when the camera leaves the
home position.
Figure
5-27.
5 Device Configuration
72
Advertisement
Table of Contents
