Smart Track Setup; Enable Alarm Track - Huawei IPC6091-P360 Quick Start Manual

IPC6091-P360
Quick Start Guide
After enabling alarm track and setting calibration parameters, the tracking PTZ dome will
auto activate to corresponding position and track the object until it is beyond the monitoring
range when the intelligent rules of panoramic camera trigger alarm.
Precondition
The panoramic camera has set the intelligent rules of intrusion or tripwire.

7.1 Enable Alarm Track

7.2 Set Calibration Parameters
7.1 Enable Alarm Track
Alarm track is disabled by default; smart track is valid only after alarm track is enabled.
Step 1 Choose Setup > Event > Smart Track > Alarm Track.
The Alarm Track tab page is displayed, as shown in
Figure 7-1 Alarm Track tab page
Step 2 Click the slider to enable Alarm Track.
----End
Issue 01 (2019-02-22) Copyright © Huawei Technologies Co., Ltd.
7

Smart Track Setup

Figure 7-1.
7 Smart Track Setup
19