Siemens SINAMICS G150 Operating Manual page 77

11/03
Basic Commissioning: Selecting the Motor Type
Motortype select.(IEC/NEMA)
xxxxxxxxxxxxxxxxxxxxxxxxxx
p0100 = 0: IEC [50 Hz / kW]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Help
F1 F2 F3
p0100 Sel. Mot. IEC/NEMA
xxxxxxxxxxxxxxxxxxxxxxxxxxxx
p0100 : 0: IEC [50 Hz / kW]
1: NEMA [60 Hz / hp]
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Help
F1 F2 F3
Motor data
Back
p0304 MOT.V_Rated
p0305 MOT.I_Rated
p0307 MOT.P_Rated
p0308 MOT.CosPhi_Rated
xxxxxxxxxxxxxxxxxxxxxxx
Help
F1 F2 F3
Motor data
Back
p0307 MOT.P_Rated
p0308 MOT.CosPhi_Rated
p0310 MOT.f_Rated
p0311 MOT.n_Rated
xxxxxxxxxxxx
Help
F1 F2 F3
Bild 5-5 Selecting the motor type and entering the motor data
SINAMICS G150
Operating Manual
In the first dialog screen, select the line frequency
and motor data in kW or hp.
Change the values with <F4>
Confirm the values with <F5>
Change OK
F4 F5
Defined as follows:
0: line frequency 50 Hz, motor data in kW
1: line frequency 60 Hz, motor data in hp
With <F2> and <F3> you can select the possible
settings.
Cancel OK
Press <F4> to abort motor selection
Press <F5> to confirm the setting.
F4 F5
Entering motor data specified on the type plate
Change the values with <F4>:
400.0 V
A screen appears in which you can enter the
405.0 A
respective values.
235.0 kW
0.870
Press <Back> to return to the previous dialog screen
Change OK
F4 F5
Once you have set the values, press <F5> to confirm
them. The confirmed values are displayed with a tick
235.0 kW
behind the parameter number.
0.870
50.0 Hz
1485.0 min -1 Once you have set and confirmed all the values,
press <F5> to continue with basic commissioning.
Change Continue
F4 F5
Commissioning
5-5