Show Snmp - Digitalchina Networks DCS-3950 series Manual

5.4.6.1 Monitor and Debug Command List

5.4.6.1.1 show snmp

Command: show snmp
Function: Display all SNMP counter information.
Command mode: Admin Mode
Example :
Switch#show snmp
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors (Max packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
0 Get-response PDUs
0 SNMP trap PDUs
Displayed information
snmp packets input
bad snmp version errors
unknown community name
illegal operation for community
name supplied
encoding errors
number of requested variablest
number of altered variables
get-request PDUs
get-next PDUs
DCS-3950 series Ethernet switch manual
Explanation
Total number of SNMP packet inputs.
Number of version information error packets.
Number of community name error packets.
Number of permission for community name error
packets.
Number of encoding error packets.
Number of variables requested by NMS.
Number of variables set by NMS.
Number of packets received by 'get' requests.
Number of packets received by 'getnext' requests.
74