Vlan Mode; Acl Mode; Configuration Syntax - Digitalchina Networks DCS-3950 series Manual

port-channel

4.2.1.1.5 VLAN Mode

Using the vlan <vlan-id> command under Global Mode can enter the corresponding
VLAN Mode. Under VLAN Mode the user can configure all member ports of the
corresponding VLAN. Run the exit command to exit the VLAN Mode to Global Mode
4.2.1.1.6 DHCP Address Pool Mode
Type the ip dhcp pool <name> command under Global Mode will enter the DHCP
Address Pool Mode prompt 'Switch(Config-<name>-dhcp)#'. DHCP address pool
properties can be configured under DHCP Address Pool Mode. Run the exit command to
exit the DHCP Address Pool Mode to Global Mode.

4.2.1.1.7 ACL Mode

ACL type
Standard IP
ACL Mode
Extended IP
ACL Mode

4.2.1.2 Configuration Syntax

DCS-3950 series Switch provides various configuration commands. Although all the
commands are different, they all abide by the syntax for DCS-3950 series Switch
configuration commands. The general commands format of DCS-3950 series Switch is
Type interface
port-channel
<port-channel-nu
mber> command
under Global
Mode.
Entry Prompt
Type ip
Switch(Config
access-list -Std-Nacl-a)#
standard
command
under Global
Mode.
Type ip
Switch(Config
access-list -Ext-Nacl-b)#
extanded
command
under Global
Mode.
DCS-3950 series Ethernet switch manual
Switch(Config-if-
port-channelx)#
Operates
Configure
parameters for
Standard IP
ACL Mode
Configure
parameters for
Extended IP
ACL Mode
Configure
Use the exit
port-channel command to
related return to
settings such Global Mode.
as duplex
mode, speed,
etc.
Exit
Use the 'exit'
command to
return to Global
Mode.
Use the 'exit'
command to
return to Global
Mode.
33