Igmp Snooping Configuration Command List - Digitalchina Networks DCS-3950 series Manual

tatic-group <multicast-IPAddress>
interface {[ethernet|port-channel]
<interfaceName>
No ip igmp snooping vlan <vlan-id>
tatic-group <multicast-IPAddress>
interface {[ethernet|port-channel]
<interfaceName>

11.2.2 IGMP Snooping configuration Command List

11.2.2.1 ip igmp snooping
Command: ip igmp snooping
no ip igmp snooping
Function: Enable the IGMP Snooping function: the ' no ip igmp snooping' command
disables this function.
Command mode: Global Mode
Default: IGMP Snooping is disabled by default.
Usage Guide: Use this command to enable IGMP Snooping, that is permission every vlan
config the function of IGMP snooping. the ' no ip igmp snooping' command disables
this function.
Example: Enable IGMP Snooping.
Switch (Config)#ip igmp snooping
11.2.2.2 ip igmp snooping vlan
Command: ip igmp snooping vlan <vlan-id>
no ip igmp snooping vlan <vlan-id>
Function: Enable the IGMP Snooping function for the specified VLAN: the 'no ip igmp
snooping vlan <vlan-id>'command disables the IGMP Snooping function for the
specified VLAN.
Parameter: <vlan-id> is the VLAN number.
Command mode: Global Mode
Default: IGMP Snooping is disabled by default.
Usage Guide: To configure IGMP Snooping on specified vlan, the global IGMP Snooping
should be first enabled. Disable IGMP Snooping on specified vlan with the 'no ip igmp
snooping vlan <vlan-id>' command.
Example: Enable IGMP Snooping for VLAN 100 in Global Mode.
Switch (Config)#ip igmp snooping vlan 100
11.2.2.3 ip igmp snooping vlan immediate-leave
DCS-3950 series Ethernet switch manual
the 'No ip igmp snooping vlan <vlan-id>
tatic-group <multicast-IPAddress> interface
{[ethernet|port-channel] <interfaceName>
command will cancel the configuration.
197