Show Logging Buffered - Digitalchina Networks DCS-3950 series Manual

Filter Items:
Module State Servirity
shell On debugging
Relative Command：logging on

5.6.4.1.2 show logging buffered

Command：show logging buffered [<buffersize>]
Function：Display detailed information of the channel of the log buffer
Parameters：<buffersize> is the number of the log message to display
Command mode：Privileged configuration mode.
Default Setting：100 log messages will be displayed without any parameter.
Usage Guide: If the actual pices of logging information is less than <buffersize>, the
actual pieces of logging information will be displayed.
Example: Display the most recent 20 items of logs in the log buffer.
Switch# show logging buffered 20
/********* Logbuff Channel ***************/
Channel ID:3, channel name:logbuff
State: On
Allowed max messages:100,Dropped messages:0,Current messages:0
Filter Items:
Module State Servirity
Driver On debugging
Msgs:
1. IFNET-5-UPDOWN:Line protocol on interface GigabitEthernet0/1/1, changed state to
UP
2. EXEC-5-LOGIN: Console login from Console0
Relative Command：logging on，show channel logbuff
5.6.4.1.3 show logging lastFailureInfo
Command：show logging lastFailureInfo
Function：Display the abnormal information recorded in the flash
Command mode：Privileged configuration mode.
Example:
Switch# show logging lastFailureInfo
Relative Command：erase logging lastFailureInfo
5.6.4.1.4 erase logging lastFailureInfo
Command：erase logging lastFailureInfo
Function：Erase the abnormal information recorded in the flash
DCS-3950 series Ethernet switch manual
101