Port Isolation; Introduction Of Port Isolation; Port Isolation Configuration - Digitalchina Networks DCS-3950 series Manual

DCS-3950 series Ethernet switch manual
Function: Disable the passwords
Command mode: Global Mode.
Parameters: <enable_password> is the password to be removed.
Default: None
Usage Guide: if <enable_password> is not configured, and the password to be
deleted is for the admin user, then interactive dialog will be entered. If the password to be
deleted belongs to visitor, the <enabled_password> option can be obmitted.
Example, Remove the password for the admin user, which is Password.
switch(config)#no enable password level admin
Input password:*** <-------------Input Password here.

5.8 Port Isolation

5.8.1 Introduction of Port Isolation

Port isolation is aimed at meeting the user's demand showed below:
Fig 5-3 the topologic structure of the switches
The topologic structure of the switches is illustrated in the picture above. The demand
is that, once the configuration port on switch1 is isolated, the e0/0/1 and e0/0/2 on switch1
are not connected, while both of which can be connected to the uplink port e0/0/25. That is
all the downlink ports can not connect to each other, but a downlink port can be connected
to a specified uplink port. The uplink port can be connected to any port.

5.8.2 Port Isolation Configuration

5.8.2.1 Port isolation configuration Task List
104