Configuring Web Server - Digitalchina Networks DCS-3950 series Manual

Please input the new telnet user password:
Notice: The valid length for the password should be between 1 and 8 characters. After
user name and password are configured correctly, system configuration shell will be
prompted.
Select '1' in the Telnet server configuration menu and press Enter, the following screen
appears:
Enable switch telnet-server or no? (y/n) [y]:
Type 'y' and press Enter, or just press Enter to enable Telnet service, type 'n' and
press Enter to disable Telnet service. The Telnet server configuration menu appears.
Select '2' in the Telnet server configuration menu will return to the Setup main menu.

3.3.4 Configuring Web Server

Select '3' in the Setup main menu and press Enter to start configuring the Web server,
the follow appears:
Configure web server
[0]: Add webuser
[1]: Config web server status
[2]: Exit
Selection number:
Select '0' in the Web server configuration menu and press Enter, the following screen
appears:
Please input the new web user name:
Note: the valid username length is 1 to 16 characters. When the user enters a valid
username and presses Enter, the following screen appears
Please input the new web user password:
Note: the valid password length is 1 to 8 characters. After configuring the username
and password, the menu will return to the Web server configuration section
Select '1' in the Web server configuration menu and press Enter, the following screen
appears:
Enable switch web-server or no?(y/n) [y]:
Type 'y' and press Enter, or just press Enter to enable Web service, type 'n' and press
Enter to disable Web service. The Web server configuration menu appears.
Select '2' in the Telnet server configuration menu will return to the Setup main menu.
DCS-3950 series Ethernet switch manual
20