Show Debugging; Show History - Digitalchina Networks DCS-3950 series Manual

Example:
Switch#show clock
Current time is TUE AUG 22 11：00：01 2002
Relative Command: clock set

5.2.5.3 show debugging

Command：show debugging
Function： Display the debugging state
Usage Guide: This command is used to show which debug options are enabled.
Command mode: Admin Mode
Example: Show the debug options currently configured.
Switch#show debugging
STP:
Stp input packet debugging is on
Stp output packet debugging is on
Stp basic debugging is on
Relative Command ：debug
5.2.5.4 show flash
Command：show flash
Function： Display the document in the flash
Command mode: Admin Mode
Example: Check the size of files in the flash.
Switch#show flash
file name
nos.img
startup-config
running-config
Switch#

5.2.5.5 show history

Command：show history
Function：Display the recent user input history command
Command mode: Admin Mode
Usage Guide: The system will preserve up to 10 history command that are entered by
users. History command can be recovered by the UP key and DOWN key, or the
equivalent Ctrl+P and Ctrl+N.
Example:
Switch#show history
enable
config
DCS-3950 series Ethernet switch manual
file length
1122380 bytes
1061 bytes
1061 bytes
56