Mstp Command List - Digitalchina Networks DCS-3950 series Manual

spanning-tree tcflush enable
spanning-tree tcflush disable
spanning-tree tcflush protect
no spanning-tree tcflush
端口配置模式
spanning-tree tcflush enable
spanning-tree tcflush disable
spanning-tree tcflush protect
no spanning-tree tcflush

10.2.2 MSTP Command List

10.2.2.1 abort
Command: abort
Function: Abort the current MSTP region configuration, quit MSTP region mode and
return to global mode.
Command mode: MSTP region mode
Usage Guide: This command is to quit MSTP region mode without saving the current
configuration. The previous MSTP region configuration is valid. This command is equal
to 'Ctrl+z'.
Example: Quit MSTP region mode without saving the current configuration
Switch(Config-Mstp-Region)#abort
Switch(Config)#
10.2.2.2 exit
Command: exit
Function: Save current MSTP region configuration, quit MSTP region mode and return to
global mode.
Command mode: MSTP region mode
Usage Guide: This command is to quit MSTP region mode with saving the current
configuration.
Example: Quit MSTP region mode with saving the current configuration.
Switch(Config-Mstp-Region)#exit
Switch(Config)#
DCS-3950 series Ethernet switch manual
Enable: the spanning-tree flush once the
topology changes.
Disable:the spanning tree don't flush
when the topology changes.
Protect: the spanning-tree flush every ten
seconds
'no spanning-tree tcflush' restores to
default setting,enable flush once
thetopology changes
Configure the port flush mode.
'no spanning-tree tcflush' restores to
use the global configured flush mode
175