Qos Command List - Digitalchina Networks DCS-3950 series Manual

<policy-map-name> | output
<policy-map-name>}
mls qos dscp-mutation
no mls qos dscp-mutation
5. Configure queue out method and weight
Command
Interface Mode
wrr-queue bandwidth <weight1 weight2
weight3 weight4>
no wrr-queue bandwidth
priority-queue out
no priority-queue out
wrr-queue cos-map <queue-id>
<cos1 ... cos8>
no wrr-queue cos-map [<queue-id>]
6．Configure QoS mapping
Command
Global Mode
mls qos map {cos-dscp
<dscp1...dscp8> | dscp-cos <dscp-list>
to <cos> | dscp-mutation
<in-dscp> to <out-dscp> | policed-dscp
<dscp-list> to <mark-down-dscp>}
no mls qos map {cos-dscp | dscp-cos |
dscp-mutation | policed-dscp}

24.2.2 QoS Command List

24.2.2.1 mls qos
Command: mls qos
no mls qos
Function: Enable QoS in Global Mode; the 'no mls qos' command disables the global
QoS.
DCS-3950 series Ethernet switch manual
the specified policy map applied to the
port. Egress policy map is not supported
yet.
Apply DSCP mutation mapping to the port;
the 'no mls qos dscp-mutation
command restores the DSCP mutation
mapping default.
Explanation
Set the WRR weight for specified egress
queue; the 'no wrr-queue bandwidth'
command restores the default setting.
Configure queue out method to pq
method; the 'no priority-queue out'
command restores the default WRR
queue out method.
Set CoS value mapping to specified
egress queue; the 'no wrr-queue
cos-map[<queue-id>]' command
restores the default setting.
Explanation
Set CoS to DSCP mapping, DSCP to CoS
mapping, DSCP to DSCP mutation
mapping, IP precedence to DSCP and
policed DSCP mapping; the 'no'command
restores the default mapping.
362