1. Attach the 2 brackets on the DCS-3950 series with screws provided in the
accessory kit.
2. Put the bracket-mounted switch smoothly into a standard 19'' rack. Fasten
the DCS-3950 series to the rack with the screws provided. Leave enough
space around the switch for good air circulation.
Caution!
The brackets are used to fix the switch on the rack. They can't serve as a bearing.
Please place a rack shelf under the switch. Do not place anything on top of the switch. Do
not block the blowholes on the switch to ensure the proper operation of the switch.
2.3.2 Connecting Console
DCS-3950 series Ethernet switch manual
Fig 2-1 DCS-3950 series Rack-mounting
15