Power Supply Connection - Digitalchina Networks DCS-3950 series Manual

DCS-3950 series provides a DB9 interface serial console port. The connection
procedure is listed below
1. Please attach the console cable which is contained in the accessory kit to the
Console port of the switch.
2. Connect the other side of the console cable to a character terminal (PC).
3. Power on the switch and the character terminal. Configure the switch through the
character terminal.
Caution!
Please use the console cable and the console commutator of the switch. Don't insert
in error to avoid break.

2.3.3 Power Supply Connection

DCS-3950 series uses 100～240VAC,50～60Hz supply by default. AC Power supply
connection procedure is described as below:
DCS-3950 series Ethernet switch manual
Fig 2-2 Connecting Console to DCS-3950 series
16