Dhcp Server Configuration; Dhcp Sever Configuration Task List - Digitalchina Networks DCS-3950 series Manual

forward such DHCP packets so that the DHCP packets exchange can be completed
between the DHCP client and server.
DCS-3950 series switch can act as both a DHCP server and a DHCP relay. DHCP
server supports not only dynamic IP address assignment, but also manual IP address
binding (i.e. specify a specific IP address to a specified MAC address or specified device
ID over a long period. The differences and relations between dynamic IP address
allocation and manual IP address binding are: 1) IP address obtained dynamically can be
different every time; manually bound IP address will be the same all the time. 2) The lease
period of IP address obtained dynamically is the same as the lease period of the address
pool, and is limited; the lease of manually bound IP address is theoretically endless. 3)
The IP addresses bound manually have higher priority than the IP addresses allocated
dynamically. 4) Dynamic DHCP address pool can inherit the network configuration
parameters of the dynamic DHCP address pool of the related segment.

18.2 DHCP Server Configuration

18.2.1 DHCP Sever Configuration Task List

1. Enable/Disable DHCP server
2. Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
(2) Configure DHCP address pool parameters
(3) Configure manual DHCP address pool parameters
3. Enable logging for address conflicts
4. Configure count of ping packets and out time
1. Enable/Disable DHCP server
Command
Global Mode
service dhcp
no service dhcp
2．Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
Command
Global Mode
ip dhcp pool <name>
no ip dhcp pool <name>
(2)Configure DHCP address pool parameters
Command
DHCP Address Pool Mode
DCS-3950 series Ethernet switch manual
Explanation
Enables DHCP server
Explanation
Configures DHCP Address pool
Explanation
302