Show Dot1X - Digitalchina Networks DCS-3950 series Manual

Parameters: authencated-user displays the authenticated users online;
authencating-user displays the authenticating users.
Command mode: Admin Mode
Usage Guide: The statistics for RADIUS authentication users can be displayed with the
'show radius count' command.
Example:
1. Display the statistics for RADIUS authenticated users.
Switch #show radius authencated-user count
The authencated online user num is: 1
2. Display the statistics for RADIUS authenticating users and others.
Switch#show radius authencating-user count
The authencating user num is: 1

14.4.1.5 show dot1x

Command: show dot1x [interface <interface-list>]
Function: Display dot1x parameter related information, if parameter information is added,
corresponding dot1x status for corresponding port is displayed.
Parameters: <interface-list> is the port list. If no parameter is specified, information for
all ports is displayed.
Command mode: Admin Mode
Usage Guide: Enabling dot1x debug information allows the check of dot1x protocol
negotiation process and is helpful in troubleshooting.
Example:
1. Display information about dot1x global parameter for the switch.
Switch#show dot1x
Global 802.1X Parameters
free resource
reauth-enabled
reauth-period
quiet-period
tx-period
max-req
authenticator mode
Mac Filter Disable
MacAccessList :
dot1x-EAPoR Enable
dot1x-privateclient Enable
dot1x-unicast Disable
802.1X is enabled on ethernet Ethernet0/0/8
Authentication Method:User based advanced
Max User Number:10
DCS-3950 series Ethernet switch manual
:unknown
:yes
:3600
:10
:30
:2
:active
244